MindsEye Guide | How To Decipher The Pattern

This guide provides clear, step-by-step instructions for solving both puzzles encountered in MindsEye. By following the methods described here, players will efficiently decipher the matching ring pattern and complete the crystal circuit without confusion. 

Each section is about a different puzzle and has thorough instructions on how to line up the pieces and make sure you've done it right.

Deciphering the Circular Pattern Puzzle

Begin by examining the three concentric rings that form the puzzle interface. These are the Outside Ring, the Middle Layer, and the Center Ring. The goal is to line up all the rings so that they make a perfect circle instead of a curve that isn't straight.

Deal with the Outside Ring first. Turn this ring around until its pieces come together to make a smooth circle. Keep in mind that the correct pattern might look backward at first; if the pieces look like an upside-down crescent, keep turning them until they match the right direction.

Next, pay attention to the middle layer. Look at how thick each circular piece is; if the thicknesses don't match, it means the segments aren't lined up right. Rotate the layer so that its segments line up perfectly with those of the Outside Ring. Make sure that the lengths of the segments match and that the lines go from one to the next without stopping.

Last, make changes to the Center Ring. Rotate this inner ring until its segments lock into the continuous circle established by the outer layers. Upon correct alignment, the puzzle will acknowledge the completed pattern.

Establishing the Crystal Circuit Puzzle

In this puzzle, players must route two separate beams of Electrical Current into the orange door slots on both sides of the chamber using movable Crystals. Each crystal redirects the current along a straight path; unused beams may terminate without affecting the solution.

Begin with the left door designated by its two orange slots. Place Crystals so that two beams of current converge on these slots. Optimal placement often requires stacking beams: position two crystals in the first row and one crystal just in front of them, allowing the beams to overlap and feed into the door slots.

Once the left door unlocks, retrieve the crystal from its socket and move to the right door chamber. This side features a similar pair of orange slots. Place one Crystal at the far right, skip the middle position, and then place one crystal in front and two at the front edge. This arrangement guides two beams into the slots, unlocking the right door.

For the final step, take the crystal positioned at the front of the room and place it into the remaining socket near the right door. This completes the entire circuit, and both doors will open simultaneously.

Also, check our MindsEye Review and other guides below:

• MindsEye Guide | Everything You Can Do In Free Roam
• MindsEye Guide | Little John's Trailer Location
• MindsEye Guide | How to Revive Matt Conti (CPR Mini Game Guide)
• MindsEye Guide | How To Power & Align The Satellite
• MindsEye Guide | How To Get To Control Room
• MindsEye Guide | How To Bypass The Power
• MindsEye Guide | How To Solve Statue Puzzle