007 First Light Guide | How to Get Inside Utilities

Here’s a guide on how to get inside Utilities in 007 First Light.

Game Guide by TauxicPandA on  Jun 04, 2026

You need to find the Command Center to reach Utilities. It takes a few steps in the lab. Here is how you do it.

007 First Light, Guide, How to Get Inside Utilities

Do the Research Tests

When you walk into the lab, you will see some dots at the top of your screen. You need to fill these dots to get all the hints. 

Start by going to the Piano and look at the first test. Keep walking around the room to find and look at every other test. Talk to the people at each station until you finish all the tasks in 007 First Light.

Use the Robot

Find the area with the Mimic and look for a person using a Laptop. Go near them and use your Watch on the Laptop. The person will walk away. Now you can use the Temperature Controls next to the desk. This makes the person inside the simulation leave.

Step onto the platform and take control of the Robot. Walk it over to the glass wall and start punching. Keep hitting it until the wall breaks.

007 First Light, Guide, How to Get Inside Utilities

Reach Utilities

Talk to the last two people at the back of the lab before you leave. Then, go speak to the third person waiting by the exit. 

They might talk about a gun, but you do not have to worry about that right now. Just walk through the broken glass. Keep going until you see an Elevator. Pry the doors open to get inside. This leads you to Utilities in 007 First Light.


Also, check our 007 First Light Review and other guides below:

Ragib Rawnak

Senior Editor, NoobFeed

Latest Articles

No Data.