Breathedge 2 Guide | Where to Find Light Bulbs

Light Bulbs in Breathedge 2 are hidden inside specific light fixtures beneath the station rather than lying loose among ordinary debris. You need the Twister before you can remove them, and only flashing fixtures contain a Light Bulb.

Unlock the Twister

Progress the antenna objectives until you have unlocked the PornHubble antenna and gained access to the Twister blueprint. You do not need to finish the entire PornHubble puzzle before looking for Light Bulbs, but you must have the Twister available because the fixtures cannot be opened normally.

Craft the Twister and take it with you before leaving the station.

Head Below the Station

Leave the station and move down over the ledge. Look for the two large pipe structures below, which are easy to recognize by their red-bordered sections. Several light fixtures are attached around this area.

Look for Flashing Light Fixtures

Check the lights attached to the pipes and focus only on the ones that are flashing. A flashing fixture contains a Light Bulb, while a non-flashing fixture is empty.

This visual cue saves time and oxygen because you do not need to inspect every fixture individually.

Unscrew the Fixture With the Twister

Approach a flashing fixture with the Twister equipped. Use the Twister to unscrew the lamp mechanism, then open the cover to reach the Light Bulb inside.

Once the cover opens, collect the Light Bulb from inside.

The lower pipe area becomes cold as you travel farther down, so keep an eye on your Cold Protection and nearby heating options while collecting additional bulbs.

With the Twister equipped, open the flashing light fixtures beneath the station to collect Light Bulbs in Breathedge 2.

FAQ

Q. What tool do you need to collect Light Bulbs?

A. You need the Twister. It is used to unscrew the fixtures that contain Light Bulbs.

Q. How do you know which fixture contains a Light Bulb?

A. Look for a flashing red light. Non-flashing fixtures do not contain a collectible Light Bulb.